Changing VL70m system settings with VL-Wizard

Issues, bugs, suggestions related to the VL-Wizard Settings
Post Reply
User avatar
VL-Wizard
Posts: 108
Joined: Fri Mar 04, 2016 2:24 pm
Location: Belgium
Contact:

Changing VL70m system settings with VL-Wizard

Post by VL-Wizard » Tue May 31, 2016 5:27 pm

Yes, the VL-Wizards has a feature to request the system parameters of your VL70m unit and change them without the need to use the VL70m front panel.

1) Open the Common-System image editor
2) Click the WX icon image under the label SYSTEM. This will send a request for VL70m SYSTEM dumpout.
3) The VL70m will return its system settings to the VL-Wizard. If not, then check your midi-in and out settings / connections
4) The WX icon stays orange color in case the VL-Wiz did not receive VL70m system data.
5) Changing the system parameters on the VLWiz will immediately update the SYSTEM settings of your VL70m.

Important:
- This feature does not work for PLGVL units
- The VL70m system settings can not be stored into the library or disk.

Post Reply