Making a path Growl & Scream
Posted: Tue Jun 27, 2017 12:44 pm
You can achieve a "natural" response for Growl & Scream by doing following;
1 - Load the voice you want to improve
2 - Open the Common-System editor
3 - Assign the Breath CC 02 to the Growl and/or scream.
4 - Set the Growl and/or Scream Controller Curve such way that you need to blow pretty hard (curve has to go upwards) - see picture
Remarks
- Not all voices are designed to respond to Growl or Scream. You might need to adjust the growl parameters of the ELEMENT.
- On request of Patchman - you can not modify the ELEMENT parameters of Patchman voices
1 - Load the voice you want to improve
2 - Open the Common-System editor
3 - Assign the Breath CC 02 to the Growl and/or scream.
4 - Set the Growl and/or Scream Controller Curve such way that you need to blow pretty hard (curve has to go upwards) - see picture
- Controllers.jpeg (151.86 KiB) Viewed 7044 times
Remarks
- Not all voices are designed to respond to Growl or Scream. You might need to adjust the growl parameters of the ELEMENT.
- On request of Patchman - you can not modify the ELEMENT parameters of Patchman voices