Making a path Growl & Scream

[VL-Wizard]

You can achieve a "natural" response for Growl & Scream by doing following;

1 - Load the voice you want to improve
2 - Open the Common-System editor
3 - Assign the Breath CC 02 to the Growl and/or scream.
4 - Set the Growl and/or Scream Controller Curve such way that you need to blow pretty hard (curve has to go upwards) - see picture

Controllers.jpeg (151.86 KiB) Viewed 8677 times

Remarks
- Not all voices are designed to respond to Growl or Scream. You might need to adjust the growl parameters of the ELEMENT.
- On request of Patchman - you can not modify the ELEMENT parameters of Patchman voices