Making a path Growl & Scream

Manuals and guidelines on the setup of the VL-Wizard
Post Reply
User avatar
VL-Wizard
Posts: 91
Joined: Fri Mar 04, 2016 2:24 pm
Location: Belgium
Contact:

Making a path Growl & Scream

Post by VL-Wizard » Tue Jun 27, 2017 12:44 pm

You can achieve a "natural" response for Growl & Scream by doing following;

1 - Load the voice you want to improve
2 - Open the Common-System editor
3 - Assign the Breath CC 02 to the Growl and/or scream.
4 - Set the Growl and/or Scream Controller Curve such way that you need to blow pretty hard (curve has to go upwards) - see picture
Controllers.jpeg
Controllers.jpeg (151.86 KiB) Viewed 1254 times

Remarks
- Not all voices are designed to respond to Growl or Scream. You might need to adjust the growl parameters of the ELEMENT.
- On request of Patchman - you can not modify the ELEMENT parameters of Patchman voices

Post Reply